Use and Care Manual

24
Ref. Description Part #
Ref. Description Part #
Replacement Parts for FP1050A
FP1050A
RELACS ELDEEN PIRG LOTSIP "7RELACS ELDEEN PIRG LOTSIP "7
Limited Warranty
Florida Pneumatic warrants its tools to be free from defects in material and workmanship for two
years from the date of purchase. This warranty does not apply to tools which have been abused,
misused, modified or repaired by someone other than Florida Pneumatic or its authorized service
centers. If a Florida Pneumatic proves defective in material of workmanship within two years after
purchase, return it to any authorized service center or to Florida Pneumatic, freight prepaid. Please
enclose your name, address and adequate proof of purchase date with a brief description of the
defect. Florida Pneumatic will, at its option, repair or replace defective tools, free of charge. Repairs
or replacements are warranted as described above for the remainder of the warranty period.
Florida Pneumatic's sole liability and your exclusive remedy under this warranty is limited to repair or
replacement of the defective tool. There are no other warranties expressed or implied and Florida
Pneumatic shall not be liable for incidental, consequential or special damages, or any other damages,
costs or expense of repair or replacement as described above.
Blows per min...........................................................................................................3,700
Weight...............................................................................................................4 - 1/2 lbs.
Length.............................................................................................................................14"
Air Inlet...........................................................................................................................1/4”
Average Air Consumption......................................................................................4 CFM
Maximum operating pressure..............................................................................60 PSI
14 O-ring (2) 115160
15 O-ring (2) 115120
16 Trigger Valve stem 120220
17 Trigger Valve body 120120
18 Trigger button 120520
19 Needle Scaler 109060
Housing
20 Cap Screw (2) 109070
21 Spring 109050
22 Needle Holder 109030
23
Buffer
24
109040
Scaler attachment 109080
Complete
Dowel Pin (2) 9425750-11
1 Set of 19 needles 109020
2 Anvil 109010
3 Barrel w/112020 425665
4 Piston 112020
5 Retaining pin (3) 111230
6 Lower valve block 9425221-05
7 Flipper valve 9425750-16
8 Upper valve block 9425221-02
9 Handle 262345
10 Retaining ring 115020
11 O-ring (2) 115110
12 Regulator knob 111110
13 Spring 118020