Product Specs

Product specification
Thank you for your purchase of Floryn FY50 -- T Plant Lamps. Please read the instructions carefully before using Floryn
FY50 -- T plant lamps for plant lighting.
【product model 】FY50-T/FY150-T/FY200-T/FY300F/L-T
【product mix 】
Main body, accessories (power cord)
【
product feature
】
long service life
Adopt international new high-end LED lamp beads and power supply drive to ensure continuous work for 18000
hours.
The hot design
The product uses cold light source, does not harm the plant and is not hot.
Anticreep
No leakage by hand, high safety.
easy for installation
The product is easy to install and quick to operate.
【matters need attention】
Use at rated voltage as shown in specification, do not use at voltage too high or too low.
Do not place the product near or in contact with fire.
When not in use, remove the power cable to ensure that the power is off.
If the power cable is damaged, replace it with the dedicated power cable to avoid danger.
Do not clean the terminals with a wet cloth and do not touch the power cord with wet hands.
Before installing, repairing, cleaning, or replacing internal components, disconnect the power supply and remove
the plug. Otherwise, electric shock may occur.
It is strictly forbidden to disassemble or repair the product without permission to avoid accidents.
【Maintenance and repair】
If there are stains on the surface of the product, wipe the surface gently with a soft dry cloth to restore the clean.
This product can be returned to the factory for free repair and replacement if it is not damaged by human cause
within 18000 hours.