Specifications

Clara - Speciﬁcation Sheet

by Piero Lissoni, 2015

Mounting Ceiling and Wall

Lamp (Bulb) Description Top LED 56W 3141lm 2700K CRI90

Environment Indoor - Dry Location

Dimming Phase-cut Dimming / Triac Type

Finish White

Technical and Product Description " '... Until, from the midst of this darkness, a sudden light broke in upon me - a

light so brilliant and wondrous, and yet so simple! Change the poles from plus to

minus and from minus to plus…' [from Young Frankenstein] ...Clara the light." P.

Lissoni CLARA ceiling/wall lighting ﬁxture, providing diffused light. The front

diffuser is made of high efﬁciency, injection molded opal Polycarbonate. Ceiling/

wall ﬁtting is in injection molded polycarbonate. Dimmable Led light source

powered without the use of any power supply/transformer, but directly by the

mains voltage (from 100 to 240 VAC). For decorative purposes an optional

accessory made of PC and ABS+PC is available in four different ﬁnishes:

fumee, transparent, chrome or copper.

Electrical

Voltage 120

Switching Yes

IP Rating IP40

Physical

Construction Material Polycarbonate

Weight 6.6 lbs

FU157009 White

Dimensional Image

Certiﬁcations

PAGE 1
Clara - Specification Sheet by Piero Lissoni, 2015 Mounting Ceiling and Wall Lamp (Bulb) Description Top LED 56W 3141lm 2700K CRI90 Environment Indoor - Dry Location Dimming Phase-cut Dimming / Triac Type Finish White Technical and Product Description " '... Until, from the midst of this darkness, a sudden light broke in upon me - a light so brilliant and wondrous, and yet so simple! Change the poles from plus to minus and from minus to plus…' [from Young Frankenstein] ...Clara the light." P.