User's Manual

User Manual – FloPatch FP120 Rev 1.0
CONFIDENTIAL UNCONTROLLED UNLESS OTHERWISE SIGNED AND/OR STAMPED. Page 10 / 33
5. BASIC OPERATION
1. Press the power button to initiate the
device.
Upon initiation, the device LED indicator
will blink rapidly to indicate it is ready to
establish a connection with the mobile
app.
2. Open the mobile app and navigate to the
“Assess Bloodflow” screen. Press the
button in the bottom left corner to open a
list of devices available to connect.
Select the desired device and wait until
the device LED indicator changes to solid
blue to indicate a successful connection.
3. Apply ultrasound gel on the device directly
over the ultrasound transducer in the
indicated area.
Auditory feedback should be heard from
the mobile app when the gel is applied.