Reference

Components
Note that cbw32.dll must be installed on the host system for this component to work. If you have installed the Measurement Computing
drivers then this file should already be on your system.
Connectors
Inputs Type Outputs Type
Board number you want to
connect to (as assigned by
InstaCal) or blank to connect
to any board
Int Status. OK,
NOBOARD or the
Measurement
Computing error
number.
String
I/O settings (see above)
String 8 x outputs receiving
analog temperature
data from the 8 inputs
on the board
Float
Trigger to set the I/O
settings
Trigger 8 x outputs receiving
the state of the 8digital
inputs on the board
Boolean
8 x inputs to change the
state of the 8 digital outputs
on the board
Boolean
207 of 494