Instructions / Assembly

BUTTERFLY CHAIR ASSEMBLY INSTRUCTIONS
The tools provided are a 9 cm open end wrench and 7 cm allen wrench for Body
Wings and Seat and 6 cm Allen key for Antenna assembly.
Step 1: Start by bolting wings to butterfly body. The butterfly body will attach to the
BACK of the wings, facing the back. (do not fully tighten until all fasteners are in
place on entire chair).
Step 2: Place seat in position and start fasteners. Seat portion will set down on top
of the four mounting tabs. (do not fully tighten until all fasteners are in place on
entire chair).
Step 3: Place antenna in position and start fasteners. With all the fasteners loose,
you may need to physically rock the chair around to align the holes.
Step 4: Snug nuts and bolts gradually by moving from fastener location on body,
wings, seat and antenna with Allen key and open end wrench.
Step 5: Once the fasteners are consistently tightened then your Butterfly Chair is
ready to be used as a seat.

Summary of content (1 pages)