User Manual

Power Connection
IMPORTANT: Ensure your receiver or speakers are turned off when
connecting the PA10 to power.
1. Connect the power adapter to the back of the PA10.
2. Plug the other end directly into a wall outlet. The Power LED will
indicate it is receiving power.
3. Put on a record and enjoy your favorite music!
20 Hz High Pass Filter
The high pass lter, also known as a rumble lter, gently rolls off low
end frequencies and eliminates subsonic frequencies. This feature
should be inactive for best audio performance. Activating this lter is
useful when experiencing mechanical resonances or feedback during
turntable playback.
•
Button In – Filter Active
•
Button Out – Filter Inactive