User Manual
Frequently Asked Questions
What cartridges are compatible with the PA10?
The PA10 is intended for use with MM (Moving Magnet) cartridges only.
Is the preamplier shielded from external interference?
The PA10 phono preamplier is internally shielded to protect the
circuitry from external sources of electromagnetic interference.
What turntables are compatible with the PA10?
All Fluance turntables are compatible with the PA10. Almost all
turntables are compatible with the PA10 but it is important to ensure
any internal preamp is disabled/bypassed.
How do I adjust volume?
Playback volume is controlled by the amplier or powered speakers
connected to your PA10. The PA10 does not have the ability to adjust
playback volume.
Are the ground cables required?
It is recommended to properly ground all devices connected in a
turntable setup. Failure to properly ground the turntable and
preamplier may cause a low frequency humming sound.
What should I do if I’m experiencing humming?
Ensure that all devices connected in the turntable setup are properly
grounded. It is recommended to also use high quality RCA cables with
a <90pF rating. If the humming persists then try moving your speakers
to a separate surface than your turntable. If your speakers and turn-
table are too close the stylus can pickup unwanted vibrations causing
humming and feedback.