User Manual

Fluance RT80/RT81 User Manual
6
First Time Setup
Step One: Installing the Platter
1. Remove the protective packaging
and ensure the turntable is placed on
a sturdy and level surface. Place the
metal platter onto the spindle located
in the middle of the turntable.
2. Rotate the platter until the rubber
belt installation ribbon aligns with the
motor pulley. Remove the tape from
the installation ribbon.
3. Use the installation ribbon to lift the
rubber belt and place it around the
motor pulley. Remove the installation
ribbon and rotate the platter several
times to ensure the rubber belt is
secure and not twisted.
4. Place the turntable mat on top of
the platter.
Note: When using the Fluance rubber turntable mat
ensure the Fluance logo is facing up when placing
the mat.
Installation Ribbon
Motor Pulley
Metal Platter
Spindle
Turntable Mat