User Manual

Fluance RT82, RT83, RT84, RT85 User Manual
10
Step Six: Balancing the Tonearm
Important!
Complete all steps for balancing the tonearm. Incorrect tonearm balancing can cause damage to the stylus and to your
records. For additional assistance go to www.uance.com/support to watch a tutorial video for this process.
1. Remove the stylus protector.
3. Position the tonearm over the
platter.
5. With the cueing lever now lowered, turn the entire counterweight until the tonearm is bal-
anced and oating horizontally when headshell is released. Do not allow the stylus to touch
the platter.
6. Set only the counterweight indicator ring to “0” on the center line while keeping the
tonearm balanced then lock the tonearm on the tonearm rest.
2. Unlock the tonearm and lift the
cueing lever.
4. Hold the headshell and lower the
cueing lever completely. Protect the
stylus from touching the platter.
Lock Cueing Lever
Tip: When balancing the tonearm make sure the cueing lever is down and the anti-skating control is set to 0.
Counterweight
Indicator Ring
Center Line
Cueing Lever