User Manual

Fluance RT82, RT83, RT84, RT85 User Manual

Step Nine: Playing a Record

Tip: For best audio performance the dust cover should be removed during playback.

Note: When the turntable is not in use the speed selection knob should be set to OFF to turn the turntable completely off.

The turntable setup is now complete! Enjoy your Fluance turntable. Should you require any

further assistance please visit us at www.uance.com/supportfor how-to videos and guides.

1. Lift the dust cover

2. Place a record on the spindle (use the

45 Adapter if necessary)

3. Turn the speed selection knob to the

correct RPM typically listed on your

record (Normal LP playback speed is 33

RPM)

4. Unlock the tonearm lock

5. Lift the cueing lever

6. Move the tonearm to the desired

starting point

7. Lower the cueing lever

Note: The auto stop function will take approximately 30 seconds at the end of the record before the turntable stops spinning.

Due to variances in vinyl record production some records may not work correctly with the auto stop function.

Auto Stop Function

The auto stop function is designed to extend the life of your stylus. At the end of a record,

the platter will automatically stop spinning if auto stop is enabled. This feature will also require

that the tonearm is moved over the record before the platter will start spinning at the selected

speed.

If the auto stop switch is set to the OFF position the platter will begin spinning as soon as

the speed selection knob is set to 33 or 45. To stop the record from spinning set the speed

selection knob to the OFF position.