User Manual
Fluance RT82, RT83, RT84, RT85 User Manual
17
Cueing Lever Not Lowering Tonearm
• Use instructions in step four of the rst time setup instructions to conrm the tonearm was
balanced and set to the correct tracking force.
• Lock the tonearm and lower the cueing lever. Gently press down on the tonearm bridge until
fully lowered to reset the tonearm lowering mechanism.
Low Volume
• Check the RCA connections are correct and fully inserted. (See Step Seven)
• If the turntable is directly connected to an amplier it must have a PHONO input.
• The turntable does not include an internal preamp so an external preamp or amplier with
PHONO input must be used with the turntable. The Fluance High Fidelity Phono Preamp
(PA10) is designed for the Reference Series turntables and is available on www.uance.com.
Humming Sound
• Connect the ground wire to your external preamp or amplier. If using an external
preamp ensure the second ground wire is connected from the preamp to the amplier
/powered speakers.
• Ensure the headshell is fully tightened and secured.
• The turntable and other devices should be directly connected to a power outlet. It is
recommended to avoid power bars or extension cables.
• Ensure the speakers are positioned away from the turntable. The turntable should not
be placed in front of the speakers or on the same surface as the speakers.
Need Additional Help?
• Do not return this product to the store.
• Please contact Fluance Customer Experience rst, regarding any additional information on
product features, specications or assistance with setup.
• Online web chat or Support: www.uance.com/contact
• Online support videos and guides: www.uance.com/resources