Setup Guide

This edge shorter on purpose to allow for proper folding
1
1
3
4
2
1
Then, add a
Button
Remove one of
the Button
covers.
Optionally, you can add a
Faceplate (sold seperately). Pull
out the Faceplate fasteners, place
the Faceplate on the Tile, and
re-insert the fasteners
2
Download and install the FluentPet
app to your phone or tablet. Follow
the on-screen prompts.
3
Press the setup button on the back.
The WiFi connect light on the
Speaker will flash. Follow the steps
in the app to connect your Base
HexTile to your WiFi network.
As a visual reminder of which sound
you have associated with which
button, you can add a sticker from
the Sticker sheet.
What’s included
Requirements
Networking requirements: A smartphone supporting iOS 12
or later, or Android 10 or later. The FluentPet Connect System
connects directly to your home’s WiFi network (wireless
802.11g standard—at 2.4 GHz; WEP, WPA or WPA2 personal
security; Automatic (DHCP) IP setup (static IP configuration is
not supported).
Base HexTile
1
1
2
3
4
Base HexTile
Buttons (6)
Button covers (6)
Sticker sheet
Faceplate fasteners (6)
(to be used with Faceplates, not included)
This manual
USB Charging cable
Installing your first button
Connecting your Base HexTile
2
Connect the USB cable to the Base
HexTile and a USB charger
(not included) to fully charge the
battery.
1
Remove one of the button covers and
replace it with a button. If
you use a Faceplate, mount it back on.
Tip: Start with just one button until
your learner is ready for the next one.
Be patient—adding more buttons is a
good thing, but some learners can get
overwhelmed, so be careful about
adding too many at once.
Go to fluent.pet/getstarted for more detailed instructions,
troubleshooting, and to view video instructions.
Adding more buttons
FluentPet Connect
Setup & instructions
CMYK
Pantone 3155C
Pantone 3115C
Magenta represents dieline
This edge shorter on purpose to allow for proper folding
FluentPet App:
flnt.pt/app
© 2022 CleverPet, Inc. HexTile, FluentPet, and the FluentPet designare all registered trademarks of CleverPet, Inc., and
"Let's teach them to talk", the teal sound button color, and the puzzle piece hextile shape are all pending trademarks.
Web or chat: fluent.pet/support | Email: [e-mail]
You can save the packaging
provided to store your buttons,
button covers, and extra fasteners.
CoverBack
Additional Faceplate covers are
recommended. The covers let you
change the color of your Base
HexTile, which can help your
learner remember and locate
HexTiles.
Order them trough the app or
at fluent.pet
Use the FluentPet app to track your
learner's progress and receive
notification when your learner is
using their buttons.
@fluentpet
In the FluentPet app, record a new
word and assign it to the newly
installed button.
2
3
1
Additional tips
Fold
Fold
Fold
Fold
Speaker
flnt.pt/app
If you have a Faceplate installed, remove it first
by pulling out the Faceplate fasteners. Punch out
a corresponding circular tab.
Free Ebook:
flnt.pt/ebook
Online setup guide & videos
Check out fun resources
that include videos, a user
forum, and other helful
information.
flnt.pt/getstarted