Table of Contents English Introduction. What's Inside? FX Series Monitors Features. Front and Rear Panel Features: Installation Connecting to Preamble or Computer Outputs. Positioning Your FX Series Monitors. . ‘Warranty: Technical Specifications... FX50 & FX80 Response Graphs...
introduction Thank you for choosing the FX Series bl-amplified, near-field studio reference monitor. Fluid Audio Is quickly becoming a recognized brand the world over for professional audio monitoring. Designing speakers for almost 30 years, the founders of Fluid Audio ars also songwriters and musicians Just lke you and know exactly what is required for tracking and mixing great music. Now, after painstaking tuning and voicing, Fluid Audio is proud to present the FX Series of monitors.
Enclosure and EQ DIP-switches The enclosure design of the FX Series monitors have a very important role in shaping the overall sonic response of the speaker Besides beg made of acoustically efficient MDF material, It Is also reinforced by internal bracing to ensure solid bass response. The customized front baffle uses large raid all around which aids in minimizing acoustic diffraction.
« TRS TP signal positive «STRINGING signal negative © TRS SLEEVE Unbalanced 1/4" wiring can be done with either a two or three-conductor (TS or TRS) plug. A two conductor (TS) plug automatically grounds the signal negative input, whereas a thees-conductor (TRS) plug, wired unbalanced, provides the option of leaving the negative Input open or grounded. We recommend that you ground the unused negative Input {this can be done by wiring the ring and sieve of the TRS plug together).
6. POWER RECEPTACLE: Accepts a detachable 3-circuit line cord in order to power the monitor. The FX Sealers Is equipped with an International switch-mode power supply, so thees Is no need to set it for your local voltage or frequency. 7. FUSE HOLDER: Holds the spare user replaceable main fuse. 8. POWER ON/OFF SWITCH: This switch tums the monitor on and off. Make sure to power the monitor off when connecting the power cable. 9.
Correct Power Operation: Since the FX Series monitors contain their own amplifier, they must be connected to a power outset using the detachable AC cable provided. Do not defeat the safety purpose of the polarized or grounding-type plug. Please use the correct AC power plug for your region. (It should cons with your FX speaker, but if it does not, please contact the retailer you purchased the FX speaker from).
Connecting to Preamble or Computer Outputs Before connecting, mask sirs the output device's power has been muted off. Plug the XLR balanced or RCA cable to the corresponding output connectors of a pre amplifier. FX Orientation and Listening Position Placement of your speakers is one of the most important procedures in order to get the best from your listening experience. To listen with the F's performing to their maximum capability, an appropriate listening environment and correct placement are required.
Technical Specifications FX50 FX80 Type: 2-Way, Coaxial Studio Monitor with |2-Way, Coaxial Studio Monitor with ype: Class D Amplifier Class D Amplifier 5" composite curved cone with high |8" composites paper cone with high LF Driver: [temperature voice coil and damped temperature voice coil and damped rubber surround rubber surround HF Driver: 1" natural silk dome 1.2" natural silk done Frequency Response: [49Hz-22kHz 35Hz-22kHz [Crossover Frequency: (2.85kHz 2.4kHz.