User Instructions

Step 4 Cont.
16” Supply Line Connection
F.
Attach the middle opening of
the T-valve to the opposite end
of the 16” supply line connector
that you just secured to the
bidet until hand tight.
G.
Place the appropriate rubber
washer into the corresponding
opening of the T-valve.
H.
Secure the 16” supply line
connector by threading the
metal nut of the T-valve onto
the external valve on your toilet
and hand tighten.
Peach Tip:
For the best install,
clean the threads of
your fill valve with a
towel before
attaching T-valve
DO NOT
OVERTIGHTEN
DO NOT USE TOOLS
WHEN TIGHTENING TO
PLASTIC FILL VALVE