User Instructions

Step 5.
20” Supply Line Connection
A.
Align threads of the plastic nut
on the 20” connector onto the
bottom opening of the T-valve
using only your hands
B.
Thread the metal nut on the
opposite end of the 20”
connector onto the water
supply line until hand tight
C.
If your water supply line is not
½”, use one of the included
threaded adapters.
Peach Tip:
DO NOT
OVERTIGHTEN
DO NOT USE TOOLS
ON PLASTIC NUT
Peach Tip:
Choose the correct adapter by
first attaching it to the water
supply line valve then inserting
the adaptor thread side first into
the connector nut.
Black = 3/8"
Silver = 1/2”
Bronze = 7/16”