User Instructions

Step 6. Finishing touches
A.
Using a wrench, tighten all
metal-to-metal connections ½
turn past hand tight.
B.
Slowly turn the water supply on
and check for leaks at the
valve. If a leak occurs, use a
wrench to turn the metal nuts in
¼ turn increments until the leak
stops.
C.
Once all supply lines are
securely installed, remove the
tape from the wand cover, and
plug in your bidet. Check that
the light on the left side marked
“AUTO/STOP” comes on.
IMAGE TEXT
Label each metal
connections
Peach Tip:
DO NOT
OVERTIGHTEN
DO NOT USE TOOLS
ON PLASTIC NUT OR
PLASTIC FILL VALVE
NEED IMAGE
Need to shoot