User's Manual

12
Figure 6.1: Plug-In Installation Procedure
Additionally, the FM320 can be upgraded to support the 128-bit AES industry-grade data
encryption, the 4.9 GHz U.S. public safety band
1
, Fluidity, the L2TP tunneling, the Virtual Gigabit.
Fluidity, L2TP, Virtual Gigabit are described in specific user guides. A summary of the available
Plug-ins for the FM units is reported in Table 6.1.
6.1 Plug-In Activation/Deactivation Procedure
The Plug-in management procedure has been standardized for maximum flexibility as follows.
When a customer purchases a Fluidmesh Plug-in, a generic 16-digit License Code is provided.
Because the License Code is generic and not associated with any device, it needs to be activated
before it can be used on a Fluidmesh device. In order to activate a License Code, the user can
access the Fluidmesh website
2
(www.fluidmesh.com) and bind the License Code to the
specific Fluidmesh Unit ID or Fluidmesh Product Serial Number to which the Plug-in should be
applied. By doing so, the Fluidmesh website will provide the user with a specific eight digit
Activation Code that can be applied to the specific device to activate the Plug-in functionalities.
The overall process is depicted in Figure 6.1.
Figure 6.2(a) depicts the Fluidmesh Web extranet interface to generate Activation Codes available at
www.fluidmesh.com. As indicated, the purchased License Code must be bound to the unit’s
unique ID (both the unit ID and the Serial Number are accepted) in order to get the Activation Code.
Please refer to Section 7.13 to input the Activation Code into the unit Web interface.
To provide the maximum flexibility in the Plug-in management, Fluidmesh allows the deactivation
of any installed Plug-in in order to transfer it to another Fluidmesh unit. Specifically, each Plug-in
can be deactivated via the Web interface of the unit according to the procedure described in
Section 7.13. A Deactivation Code is provided by the unit which can be input in the Fluidmesh
Plug-in Management Web Page on Fluidmesh Extranet to generate a fresh License Code as
depicted in Figure 6.2(b). The latter can then be used to generate a new Activation Code to
activate the Plug-in for a different unit.
1
Not available in Brazil.
2
In order to acces the Fluidmesh extranet, users need to register on the Fluidmesh website at
www.fluidmesh.com. Registration is free of charge.