User's Manual

13
(a) Plug-in Activation
(b) Plug-in Deactivation
Figure 6.2: Activation/Deactivation Code
Generation Web interface available at www.fluidmesh.com.
7 FMQuadro™ Web Based Interface and Configuration
Every FM unit can be configured and managed using a Web-based Graphical User Interface
(GUI). By default, each FM unit is configured in Bridge Mode with the Bridge IP address
192.168.0.10 and netmask 255.255.255.0.
To change the settings on the units, you need to log-in to the Web- based interface.
7.1 Software and Hardware Requirements
To log-in to the Web GUI, you need a PC with a Web-browser, an Ethernet port, and an Ethernet
cable.