User's Manual

15
Figure 7.1: Log-In Window.
7.3 End-User License Agreement and Region of Operation
The first time you log-in, you will be asked to accept the terms of the end-user license
agreement and select the country where you will be operating the unit. You must accept the
terms of the license agreement in order to activate the device. If you do not wish to accept the
terms of the license agreement, please turn off the unit and contact Fluidmesh Networks. Choosing
a wrong country/regulatory domain setting may lead to an illegal wireless configuration.
Once the license is accepted, the unit can be configured. Two configuration methods are available as
shown in Figure 7.3(a): MeshWizard™ and Classic. The former consists of a simple four step
wizard to configure the basic settings of the unit (see Section 7.4), whereas the latter is the classic
Fluidmesh FMQuadro for advanced configuration (see Section 7.5).
Figure 7.2: End-User License Agreement