User's Manual

1
1 Manual Overview
This manual describes how to install and operate the Fluidmesh 3200 BASE series products. More
specifically, this manual contains a general overview of the Fluidmesh 3200 BASE, in Section
3.1. Please refer to Figure 1.1 for a representation of the product. This user’s manual also
includes a complete overview of the network architectures that can be created using Fluidmesh
technology, and is discussed in Section 4. The Fluidmesh network addressing is described in Section
5. The use of Fluidmesh software plug-ins, their features, and their installation procedures in a
network follows in Section 6. The FMQuadro is then described in Section 7. Please note that, unless
otherwise explicitly specified, the FMQuadro presentation refers to the Fluidmesh 3200 BASE.
Screenshots shown in this manual are explanatory examples and may be different from the ones that
appear when you run the FMQuadro.
)
Figure 1.1: FM 3200 BASE
2 Precautions
2.1 Fluidmesh Networks Products Are For Professional Use Only
Fluidmesh Networks products have been designed with safety in mind. However, if not used
properly, they can cause fires that may lead to serious bodily injuries. To avoid such accidents,
make sure that you are properly qualified to install these products.
2.2 In Case of Breakdown
In case of system breakdown, discontinue use and immediately contact your authorized Fluidmesh
Networks dealer or Fluidmesh Networks LLC directly.
2.3 In Case of Abnormal Operations
If the unit emits smoke or an unusual smell, if water or other foreign matter enters the enclosure, or
if your drop the unit or damage the enclosure, power off the unit immediately and contact your
authorized Fluidmesh Networks dealer or Fluidmesh Networks LLC directly