User's Manual

36
Figure 7.21: Status Report
Log,Message!
Description!
*$AZ!CA,TZ!%+!6C/8#4&!
SA*!@$A*)&*$!C#)$!Z!'#*+!6C/8#4&M!
(A2$$*)T!:"[T!86C0%(2$*!Q.!
Zb! ;HBZ!??a!;HZ]!
2$!$%-*+$2-C!
.#++%30*!86C0%(2$*!Q.!Z!A2+!-%')2$*8!9)#-!;HB!
288)*++!Z!$#!]M!
Table 7.6: Status Description
7.20 Ping Softdog
This page can be used to set up constant pings toward multiple destinations. If the Fluidmesh
unit detects that connectivity is lost, the users can specify whether the Fluidmesh unit must
reboot or not. This can be done by checking or unchecking the reboot checkbox. The purpose of the
constant ping is thus twofold. On one hand, it can be used to reboot the unit in case of
malfunctions. On the other hand, it can be used as a keep-alive message to multiple devices like IP
phones.
7.21 Save and Restore Settings
This is a handy tool for saving and restoring Fluidmesh radio configuration. The typical scenario
of use is the substitution of a damaged unit in the field. The new unit can be configured
restoring the previously saved configuration of the damaged unit. This greatly speeds up the
maintenance process and prevents configuration errors from happening.