User's Manual

Vibration Meter

Before You Start

Operating/Storage Altitude ................. Sea Level to 3,048 meters

(10,000 feet)

IP Rating ............................................. IP54

Vibration Limit ..................................... 500 g peak

Drop Test ............................................ 1 meter

Electromagnetic Environment

IEC 61326-1: Portable

FCC ................................................ CFR Title 47, Part 15, Subpart B

Korea (KCC) ................................... Class A Equipment (Industrial

Broadcasting & Communication

Equipment)

This product meets requirements for industrial (Class A)

electromagnetic wave equipment and the seller or user should take

notice of it. This equipment is intended for use in business

environments and is not to be used in homes.

Before You Start

This section helps you to know the Meter parts, controls,

connections, and status LEDs.

Unpack and Inspect

Carefully unpack and inspect the:

• Vibration Meter

• Storage case

• USB Cable

• Quick Reference Guide

• Belt Holster

• AA (2) Lithium non-rechargeable batteries

Storage

When not in use, always keep the Meter in the supplied

storage case. The custom interior of the case supplies

protection for the Meter, documentation, and accessories.

Battery

Before you use the Meter for the first time, install the two

AA lithium non-rechargeable batteries (included). See

Battery Replacement on page 38 for more information.

The Meter also operates on two AA alkaline (3 V)

batteries. Due to short battery life, alkaline batteries are

not recommended.

Note

Set the battery type in the Device Settings menu.

See page 12.

 shows on the display when battery power is low.

Replace the batteries before you continue to use the

Meter.