User's Manual

805/805 FC
Users Manual
24
Add to Setup
You can add a Second Level ID to a setup in the Meter
memory at any time.
To add a new Second Level ID:
1. Push .
2. Push  and  to highlight Add to Setup.
3. Push  and  to highlight the Setup name.
4. Push  to open the menu for the Second
Level ID.
5. Push    and  to highlight a letter or number.
6. Push  to set the letter or number.
7. Repeat steps 5 and 6 to make a unique name for
the setup.
8. Push .
After the Meter saves this new Second Level ID, it
goes back to the Setup menu.
Enable Fluke Connect (805 FC only)
You can transmit the most recent measurement with
wireless technology and view the results on the Fluke
Connect App on your device.
Note
You need to enable Fluke Connect each time you
turn on the Meter. When Fluke Connect is
enabled, a wireless icon (
) shows on the LCD.
To enable Fluke Connect:
1. Push .
2. Use the navigation buttons to select Enable Fluke
Connect.
To disable Fluke Connect:
1. Push .
2. Use the navigation buttons to select Disable
Fluke Connect.
To transmit a measurement to Fluke Connect:
1. Take a measurement.
2. Push  to open the Save screen.
3. Select a method to save data.
When you save, the Meter transmits the data to
Fluke Connect app.
4. Use the Fluke Connect App on your device to
receive and view the test results.