User's Manual

Vibration Meter

Firmware Upgrades

At intervals, upgrades are available for the Meter firmware.

Contact Fluke for upgrade availability. If you have

registered your Meter purchase, Fluke will send an

upgrade notice to you automatically.

To upgrade the Meter:

1. Download the upgrade file for the Meter from the

Fluke website at www.fluke.com.

2. Connect the USB cable to the PC or laptop. See

USB on page 16 for more information.

3. Make sure the Meter is off.

4. Simultaneously push and hold  and  as

you connect the other end of the USB cable to the

Meter.

The Meter boots up in the firmware upgrade mode

and stays on while it is connected to the PC.

5. Identify the external disk that is the Meter in an

Explorer window on the computer.

6. Make a copy of the upgrade file to the external

disk that is the Meter.

7. Right-click on the external disk and select eject.

8. Disconnect the Meter from the host PC.

9. Restart the Meter.

The Meter operates with the new firmware after

the restart.