User's Manual

Beacon100
Users Guide
esa001.bmp
Figure 1. Beacon100 User Interface
Activating the Tag
The Beacon100 tag is delivered without any of the configuration settings needed to
function. These environment specific settings must be applied before the tag can connect
to the network and the Positioning Engine.
Tag activation is done using Beacon100 software that wirelessly configures the tags. See
more information on the Activator software in the Fluke Biomedical Activator Users
Guide.
After successful activation, the MAC address of the tag appears in the Positioning Engine
tag list. After successful connection with Positioning Engine, you can directly manage the
configuration from Positioning Engine using the Beacon100 tag configurations.
Status Indication LEDs
The Beacon100 tag is equipped with two multi-color LEDs that provide status indication.
The following Table 1 lists the different modes of the tag LEDs.
2