User's Manual

Beacon100
Users Guide
Table 3. Additional Beacon100 Settings
Setting Description Values Available in Activator
Interval between periodic
wakeups and network
scans.
Interval in seconds. Yes
Periodic Wakeup Interval
Maintenance Interval Interval between periodic
maintenance calls.
Interval in seconds. Yes
Motion sensor enabled If set, activates motion
sensor.
Activated when
checked.
Yes
Technical Specifications
General
Outside Dimensions: 1.8 in L x 2.2 in W x 0.7 in H (45 m L x 55 mm W 19 mm H)
Weight: 1.8oz / 50 with batteries
Power: 2xCR2 3.0V Lithium (LiMnO2) batteries
Two buttons with call button functionality
Two red/green/orange status indication LEDs
Operating Temperature: 32 to 122ºF / 0 to 50 ºC (shorter battery lifetime on the low and
high end of the temperature range)
Storage Temperature: -40 to 140ºF / -40 to 60 ºC (shorter battery lifetime on the low and
high end of the temperature range); storage at room temperature recommended
Humidity: From 20% to 95 % non-condensing, relative humidity
Environmental Protection: protected against dust and spraying water, IP-65
Wi-Fi
Supported IEEE Standards: 802.11b/g
Modulation Scheme: Direct Sequence Spread Spectrum (DSSS)
Media Access: CSMA/CA
Transmit Power: +11.5dBm at 2Mbps
Receiver Sensitivity: -89 dBm at 11Mbps
Frequency Ranges:
2.400 – 2.4835 GHz (USA, Canada, Europe)
2.400 – 2.497 GHz (Japan)
Supported Networking Protocols: UDP/IP, DHCP or static addressing
Security: WEP Encryption 40/104 Bit
Antenna Type: 2x internal omni-directional ceramic multilayer, antenna diversity
Maximum Antenna Gain: +1.5 dBi
6