User Manual
Table Of Contents
- Table of Contents
- Introduction
- Comprehensive Integration Instructions for Fluke FBLE radio module
- Interface to external Microprocessor
- Physical Interface
- Software Interface
- Network Command Communication
- Device Command Communication
- Device Notification Communication
- SPI Data Packets
- SPI Packet Formats
- SPI Packet Field Definitions
- SPI Packets are Big-Endian
- Network Control Commands
- Network Control Commands
- Device Control Command Payloads
- Device Control Command Responses
- Interrupt Status Word
- Network Control Commands and Responses are Big-Endian
- BLE Custom UUID
- Firmware Upgrade over BLE
- External processor upgrade over BLE
Fluke Corporation Telephone Facsimile Email
PO Box 9090 Everett WA 98206.9090 USA 425.347.6100 425.356.5108 http//www.fluke.com
from
0 to
100
Power,
5:Charging
amming
Flash,
3:Verif
y in
progres
s,
4:Verif
y
passed,
5:Verif
y failed
1:Lo
gging
,
2:Not
Supp
orted
ber
of
byte
s for
logg
ing
in
byte
s.
s for
logg
ing
in
byte
s
inter
val
in
seco
nds
dura
tion
in
seco
nds
1 =
TB
D
• Time
o A time value from the real time clock, 64 bit signed int POSIX format.
Interrupt Status Word
Command Bit
(0 = LSB)
Description
Response to Get Data command
with this payload
0
Discovery complete
Command Data Packet containing the
number of slaves discovered.
1
Packet Received
Single Transfer Data Packet, A_ACK
or C_ACK packet received from
slave
2
Loss of Communication (Used to tell
a master it has lost a particular slave.)
Command Data Transfer packet
containing the slave device number
which has been lost.
3
Bound State Initiated (Used to tell a
slave application it has become
bound.)
None
4
Bound State Terminated (Used to tell
a slave application it has become
unbound.)
None
5
Checksum of radio software failed
None
6
Talk to Slave
Command Data Packet with the slave