User Manual

Fluke Corporation Telephone Facsimile Email
PO Box 9090 Everett WA 98206.9090 USA 425.347.6100 425.356.5108 http//www.fluke.com
o Write a Enum to to this point ask the logging state machine to change. Changes
can be seen via notification of the logging Status characteristic.
o

Enum Value
Meaning
0x00
Stop logging
0x01
Start logging
0x02
Erase logged Data
3.10. 0x2909 : IG Debugging - Read
• CC254x Module: Active as of 00.00.07
• IG Debugging - Read point. ASCII data, up to 87 bytes (see FWCS DCC payload size --
this is matched to that.). No NULL needed.
3.11. 0x290A : IG Debugging - Write
• CC254x Module: Active as of 00.00.07
• IG Debugging - Write point. ASCII data, up to 89 bytes (see FWCS Single Data payload
size -- this is matched to that.). No NULL included.
3.12. 0x290B : Sync / Pass-Thru calls
• CC254x Module: Active as of 00.00.07
• IG Debugging - Number of time a sync / pass thru was called. Temporary, used to
determine how TI stack behaved with blog write.
3.13. 0x290C : BLE Disconnect Code
• CC254x Module: Active as of 00.00.07
• IG Debugging - Code from the last BLE disconnect. values are from ll.h, (The status
values map directly to the HCI Error Codes. Per the Bluetooth Core Specification,
V4.0.0, Vol. 2, Part D.)
3.14. 0x290D : Logging Memory Size
• CC254x Module: Active as of 00.00.12
• LOGGING_MEMSIZE - 4 byte unsigned values representing the size in bytes of the
logging memory.
3.15. 0x290E : POSIX Time