User Manual
Table Of Contents
- Table of Contents
- Introduction
- Comprehensive Integration Instructions for Fluke FBLE radio module
- Interface to external Microprocessor
- Physical Interface
- Software Interface
- Network Command Communication
- Device Command Communication
- Device Notification Communication
- SPI Data Packets
- SPI Packet Formats
- SPI Packet Field Definitions
- SPI Packets are Big-Endian
- Network Control Commands
- Network Control Commands
- Device Control Command Payloads
- Device Control Command Responses
- Interrupt Status Word
- Network Control Commands and Responses are Big-Endian
- BLE Custom UUID
- Firmware Upgrade over BLE
- External processor upgrade over BLE
Fluke Corporation Telephone Facsimile Email
PO Box 9090 Everett WA 98206.9090 USA 425.347.6100 425.356.5108 http//www.fluke.com
• CC254x Module: Active as of 00.00.12
• POSIX_TIME - Read / Nofity back point. Used to set or get the device time in POSIX
format. See FWCS documentation for more info on how we use this value, 8 byte
unsigned integer value.
3.16. 0x290F : Binary Reading
• CC254x Module: Active as of 00.00.12
• READING - Binary format for passing a display reading, see
wiki:Elektra:TechnicalInvestigation/BleServicesMapping/service_flukeReading for more
information, and formatting details (Still under development at this point --
ThomasAnderson 2013-06-25)
3.17. 0x2910 : Reading Nomenclature
• CC254x Module: Active as of 00.00.12
• READING_NOMENCLATURE - ?? Marked, but not yet implimented, need to talk to
John L. -- ThomasAnderson2013
-06-25
3.18. 0x2911 : CNX FW Update Control Point
• CC254x Module: Active as of 00.00.14
• FW_UPDATE_CP - CNX Style MSP430 Firmware Update Control point. Write in
"Commands", and it sets the item back to a state. used to update firmware in MSP430.
o
Valu
e
State
0x00
CNX_FW_CP_STATE_IDLE
0x01
CNX_FW_CP_STATE_ERASING
0x02
CNX_FW_CP_STATE_ERASED
0x03
CNX_FW_CP_STATE_BUFFER_CLEARED
0x04
CNX_FW_CP_STATE_BUFFER_WRITING
0x05
CNX_FW_CP_STATE_VERIFYING
0x06
CNX_FW_CP_STATE_VERIFY_PASS
0x07
CNX_FW_CP_STATE_VERIFY_FAIL
0x08
CNX_FW_CP_STATE_SWAPPING