User Manual
Table Of Contents
- Table of Contents
- Introduction
- Comprehensive Integration Instructions for Fluke FBLE radio module
- Interface to external Microprocessor
- Physical Interface
- Software Interface
- Network Command Communication
- Device Command Communication
- Device Notification Communication
- SPI Data Packets
- SPI Packet Formats
- SPI Packet Field Definitions
- SPI Packets are Big-Endian
- Network Control Commands
- Network Control Commands
- Device Control Command Payloads
- Device Control Command Responses
- Interrupt Status Word
- Network Control Commands and Responses are Big-Endian
- BLE Custom UUID
- Firmware Upgrade over BLE
- External processor upgrade over BLE
Fluke Corporation Telephone Facsimile Email
PO Box 9090 Everett WA 98206.9090 USA 425.347.6100 425.356.5108 http//www.fluke.com
0x87
CNX_FW_CP_CMD_RADIO_INIT_CHECK
Query the initial radio
state setting.
3.19. 0x2912 : CNX FW Update Buffer
• CC254x Module: Active as of 00.00.14
• FW_UPDATE_BUF - CNX Style MSP430 Firmware Update Buffer. Used to allow the
master to write up a buffer in chunks, and then write that using the Control point. This is
done so we can use "write no response" in order to maximize the write speed. Clearing
this buffer, and writing this buffer to the MSP430 is done via the FW_UPDATE_CP
characteristic.
3.20. 0x2913 : TI OAD Image Identify
• CC254x Module: Active as of 00.00.15
• TI OAD, Image Identify Characteristics. Works the same as TI, only moved here so other
devices don't try to update us.
3.21. 0x2914 : TI OAD Image Block
• CC254x Module: Active as of 00.00.15
• TI OAD, Image Block Characteristic. Works the same as TI, only moved here so other
devices don't try to update us.
3.22. 0x2915 : User String Buffer
• F3000 BLE DMM: Active as of 00.00.08
• Module User String buffer, UTF-8 data, up to 98 bytes. This is the same as modifying the
<<Device Name>> BLE Characteristic. However, this additional item is created in order
to allow Apple products to modify this (they lockout modifying <<Device Name>>
directly).
3.23. 0x2916 : User String Control Point
• F3000 BLE DMM: Active as of 00.00.08
• Module User String Control Point, allows for clearing, or writing data in the user string
buffer. See 0x2915.
3.24. 0x2917 : Bulk Data Download Interface
• CC254x Module: Active as of 00.00.xx (expcted is 00.00.18 )
• Control point for doing Bulk Data download. Master writes in a block number, and get
back a bunch of notify packets with data.
o Write in :