User Manual

Fluke Corporation Telephone Facsimile Email
PO Box 9090 Everett WA 98206.9090 USA 425.347.6100 425.356.5108 http//www.fluke.com
support a number of BLE based service, the host processor can also generate a number of event items in
a response style pack as well.
Network Command Communication
Unless otherwise noted in the detailed command description, all communications use the following
process. The following abbreviations are used in the description:
• MA: Master Application
• MRA: Master Radio Application
Step
#
Master Application
Master Radio
1
MA formats a command
2
MA clocks the command over the SPI
to the MRA
3
MRA sets Busy high
4
MRA process the command
7
MRA formats a command response to be transmitted
over the SPI to the MR
8
MRA sets Busy low
9
MA clocks the response over the SPI
from the MRA
10
MA processes the response
Device Command Communication
In the BLE radio setup, the device commands are used to get legacy data out of the host processor into
the BLE radio for use by the TI BLE Stack.
Unless otherwise noted in the detailed command description, all communications use the following
process. The following abbreviations are used in the description:
• MA: Master Application
• MRA: Master Radio Application
Master Application
Master Radio
Command received from BLE, or timer expires. Command is generated
to be sent to MA. Once command is ready, INT line is set high.