User Manual

Fluke Corporation Telephone Facsimile Email
PO Box 9090 Everett WA 98206.9090 USA 425.347.6100 425.356.5108 http//www.fluke.com
Also perform a
checksum test.
Power
Off
Power off the
radio.
0x07
None
C_ACK
Get Data
Get a
information
from the radio
based on the
interrupt.
0x08
Interrupt
Status
received
from a Get
Interrupt
Status
command.
Depends on interrupt status
(See Network Control
Command Interrupts)
Used by
low level
interrupt
service
code.
Get
Version
Get the
software
version from
the radio
module.
0x09
None
Radio software version in a
Command Data Transfer
Packet. The version number is
encoded in a ASCII string, the
format of the version number
will be 'BLE xx.yy.zzbd' xx =
BLE APP Major version, yy =
BLE APP Minor Version zz =
BLE APP sub-Minor Version b
= 'b' for beta (e.g non release), '
' for release, ‘d’ = Development
version
Flash
Erase
Erase the flash.
0x0f
Slave device
number, if 0,
the local
radio.
C_ACK
Firmware
update only
command
Flash
Write
Write a new
program
fragment to
flash.
0x10
Slave device
number, if 0,
the local
radio.
C_ACK
Firmware
update only
command
Flash
Verify
Verify the
newly loaded
code.
0x11
Slave device
number, if 0,
the local
radio.
C_ACK
Firmware
update only
command
Flash
Swap
Send C_ACK,
swap to the
newly loaded
code and reset.
0x12
Slave device
number, if 0,
the local
radio.
C_ACK
Firmware
update only
command