User's Manual

Performance Series Thermal Imagers
Safety Information
3
 Warning
To prevent personal injury:
• Read all safety information before you use
the Product.
• Carefully read all instructions.
• Use the Product only as specified, or the
protection supplied by the Product can be
compromised.
• Replace the batteries when the low battery
indicator shows to prevent incorrect
measurements.
• Do not use the Product if it operates
incorrectly.
• Do not use the Product if it is damaged.
• See emissivity information for actual
temperatures. Reflective objects result in
lower than actual temperature
measurements. These objects pose a burn
hazard.
• Do not use the Product around explosive
gas, vapor, or in damp or wet
environments.
 Caution
To prevent damage to the camera, do not point
directly at the sun or other intense light
sources.
Operation in Extreme Conditions
Storage and/or continual operation of the Imager in
extreme ambient temperature conditions can result in
temporary interruption of operation. If this occurs, let the
Imager stabilize (cool down or warm up) before you
resume operation.
Radio Frequency Data
The Imager ships with the radio disabled. See Wireless
Connectivity for instructions on how to enable the radio.
See Imager Information for instructions on how to access
digital copies of the radio licenses on the Imager.
For more information, go to www.fluke.com and search for
Radio Frequency Data for Class A.