User's Manual

TiS10, TiS20, TiS40, TiS45, TiS50, TiS55, TiS60, TiS65
Users Manual
14
Listen to a Voice Annotation (Recording)
The i icon identifies each file that has a voice
annotation. The voice (audio) recording replays through a
Bluetooth headset or when you use SmartView software.
To play back:
1. Do the steps in the Review Image Files section on
page 29 to see the image on the display.
2. Push .
3. Push  to set Audio.
4. Push  to listen to the audio.
5. Push  again to pause the audio.
Edit Captured Infrared Image
Before you save a file, use the Imager to edit or modify the
image. You can add IR-PhotoNotes (not available on all
models), voice annotation, and text annotation as well as
change the palette and IR Fusion mode.
A Bluetooth headset is required and the radio must be
enabled for voice (audio) annotation. This feature may not
be available in all regions.
To edit:
1. With an image in the buffer, push 2 to open the
EDIT IMAGE menu.
2. Push W/X to highlight Edit Image.
3. Push Z to open the EDIT IMAGE menu.
4. Push W/X to highlight an option.
5. Push 1 to save the changes with the file.
Save Captured Infrared Image
To save an image as a data file:
1. Focus on the object of interest or inspection area.
2. Pull the trigger to capture the image. The image is now
in the buffer and you can save or edit.
3. Push 1 to save the image as a file and go back to
the live view.