User's Manual

Performance Series Thermal Imagers
Menus
33
WiFi™ Network
Infrastructure WiFi is a wireless local area network
(WLAN) that links your Imager to other wireless devices
using its radio and providing a connection through an
access point to the wider Internet. This gives you the
ability to move around within a local coverage area and
still be connected to the network.
To turn on the WiFi Network feature:
1. Go to Settings > Wireless > WiFi > WiFi Network.
2. Push W/X to highlight ON.
3. Push Select to scan for available networks within
range of the camera.
4. Push W/X to select a network.
5. Push  to connect/disconnect.
6. Enter a password if you are prompted.
Image Storage
The storage setting allows you to choose to save images
to the internal memory or micro SD memory card.
1. Go to Settings > Image Storage.
2. Push
W or X to change the setting.
3. Push  to select the new storage setting.
Fluke Connect™ Wireless System
The Imager supports the Fluke Connect™ Wireless
System (may not be available in all regions). Fluke
Connect™ is a system that wirelessly connects your Fluke
test tools with an app on your smartphone or tablet. It can
show images from your infrared camera on your
smartphone or tablet screen, save images to Fluke
Cloud™ storage, and share images with your team.
More information about how to enable the Imager radio is
on page 32.
Fluke Connect App
The Fluke Connect app works with Apple and Android
mobile products. The app is available for download from
the Apple App Store and Google play.
How to access Fluke Connect:
1. Turn on the Imager.
2. On your smartphone, go to Settings > Wi-Fi.
3. Select the Wi-Fi network that begins with "Fluke…".
This selection can vary according to how your WiFi
Hotspot/SSID is configured.
4. Go to the Fluke Connect App and select "Thermal
Imager" from the list.
You are now able to take images on the Imager.
5. Push the Image Capture button on the Imager to
capture the image. The image is now in the buffer and
you can save or edit.