Specification Sheet

ManualsBrandsFluke Networks ManualsIndustrial & ScientificTS90 Cable Fault Finder with BNC to Alligator Clips

Technical Data

T S

9 0 a n d T S

1 0 0 C a b l e F a u l t F i n d e r s

See opens, shorts & cable length quickly and easily.

Fluke Networks’ Cable Fault Finders are

the easy-to-use, competitively priced cable

management tools that save time and

money while simplifying many common

tasks. The TS90 Cable Fault Finder

(for up to 2,500 feet) and the TS100 Cable

Fault Finder (for up to 3,000 feet, and

available in a metric unit) are the fastest

tools available for measuring to opens and

shorts (even intermittent faults, because

the units measure constantly when “on”)

– all from one end of the cable.

One efﬁcient tool

The TS90 and TS100 work on virtually

any two-or-more conductor cables.

With the patented SmartTone™ analog

tone generator that generates ﬁve

different tones, identifying a speciﬁc

pair is quick and easy, even in proximity

to current-bearing cable. SmartTone

capability identiﬁes the exact pair by

changing the tone at the far end of the

cable when the correct pair is shorted. The

bright large LED screen and simple menu is

easy to read, even in low light conditions.

When clipping on to an unidentiﬁed pair at

a job site, with voltage up to 250 V AC, the

unit will immediately sound an alarm.

Now, measuring cable or identifying tone

on a speciﬁc line is no longer a time-consum-

ing, two-person task. With the TS90 or TS100,

contractors can monitor cable inventory in

trucks, warehouses, generate more accurate

bids for jobs by quickly assessing needs, and

manage cable stock with greater accuracy.

And, technicians can ﬁnd and ﬁx cable prob-

lems without pulling new wire, or blindly cut-

ting into walls or streets, saving additional

time and money. The TS90 or TS100 allow one

person to get all these tasks done from just

one end of the cable, with a single, competi-

tively priced tool.

Features:

• Three tools in one — a fault locator, cable

and wire manager, patented SmartTone™

analog tone generator

• Instantly measures distance to open or

any fault from one end of any cable pair

• Tone generator positively identiﬁes pair

• High voltage detection

• Moisture proof

• Large LED screen and easy-to-use menu

Summary of content (2 pages)

PAGE 1
TS 90 and TS 100 Cable Fault Finders ® Fluke Networks’ Cable Fault Finders are the easy-to-use, competitively priced cable management tools that save time and money while simplifying many common ® One efficient tool The TS90 and TS100 work on virtually any two-or-more conductor cables. With the patented SmartTone™ analog tone generator that generates five different tones, identifying a specific tasks.
PAGE 2
Ordering Information Model Description 26500090 TS90 cable fault finder with BNC to alligator clips 26500000 TS100 cable fault finder with BNC to alligator clips 26500500 TS100 with BNC to banana to Angled Bed-of-Nails clips 26500610 TS100 metric cable fault finder with BNC to alligator clips 26501100 TS100/TS90 linecord, BNC to alligator clip 26501200 TS100/TS90 linecord, BNC to F(MALE) 26501300 TS100/TS90 linecord, BNC to F(FEMALE) 26501600 TS100/TS90 linecord, banana 26501700 TS100/TS9