Datasheet

Overview
The FI-7000 FiberInspector Pro enables you to quickly inspect and certify fiber end-faces inside ports or patch cords. Its 2-second
automated PASS/FAIL certification eliminates human subjectivity and enables anyone to become a fiber inspection expert.
Automated Pass/Fail acceptance testing of fiber end-faces
Graphical indication of problem areas due to contamination, pits, chips, and scratches
Large touchscreen for pinch and zoom
Certify to industry standards – IEC 61300-3-35
No more confusion about whether the fiber is good or bad
Eliminate human subjectivity from end-face measurements
Save end-face views during certification process
Reduce fiber inspection time with 2-second grading
ProjX™ system manages job requirements and progress from set-up to systems acceptance, making sure all tests are
completed correctly
Taptive™ user interface simplifies set-up, and eliminates error
Analyze test results and create professional test reports using LinkWare™ management software
Fiber Inspection Certification
Certify your fiber end-faces to industry standards – IEC 61300-3-35. Or if you prefer, you can manually grade your end-faces.
Fiber Inspection Certification
ertify your fiber end-faces to industry standards – IEC 61300-3-35. Or if you prefer, you can manually grade your end-faces.
Defects that fail the standard’s
requirements are colored Red
Defects that pass the standard’s
requirements are colored Green
2 of 5