Datasheet

ManualsBrandsFLUKE NETWORKS ManualsTest EquipmentQuickClean-1.25-5P Cable tester

Datasheet: Quick Clean™ Cleaner Solution

Quick Clean Cleaner Tools - 2.5 mm,

1.25 mm and MPO

The Fluke Networks Quick Clean Cleaners are a family of mechanical cleaning tools

designed to clean fiber optic connector end faces on patch cables, within adapters or

patch panels. These Quick Clean Cleaners are molded with an antistatic material

and use a novel dry cleaning strand that gently sweeps and removes harmful

contaminants from the connector without damaging the connector end face. These

tools are particularly effective at removing contaminants during fiber optic installation

that include:

Road Dust (ISO 12103-1)

Skin Oil Residue

Salt Water Residue

Alcohol Residue

Vegetable Residue

Graphite Dryer Lint

Hand Lotion

Distilled Water Residue

Quick Clean 1.25 mm Cleaner

and 2.5 mm Cleaner

The Quick Clean 1.25 mm Cleaner is designed to

clean LC, LC secure keyed and MU connectors

while the Quick Clean 2.5 mm Cleaner is used to

clean SC, ST, FC and E2000 connectors with

either UPC or APC polished ferrules. Unlike

traditional swab cleaners that rely on the technique

of the user, the Quick Clean Cleaners provide

consistent cleaning every time. The user can easily

engage the cleaner using a simple push motion

and the user will hear a “click” sound when the

process is completed.

Features:

Simple pushing motion to engage tool

Audible CLICK to alert the user when tool is fully engaged

Clean over 525 end faces per unit

Tip extender to 208 mm for hard to reach connectors

Crush resistant to over 250N

Impact resistant to survive drops over 1.5m

Most convenient cleaning solution for 85% of fiber optic network performance issues

Research has shown over 85% of

fiber related problems in data

centers, campus, and other

enterprise or telecom environments

are caused by contaminated

connectors or end-faces.

With Fluke Networks Quick Clean™

Cleaners, harmful contaminants are

easily removed from a wide variety

of connector types. Even with no

training, field technicians and fiber

installers can use a simple insertion

and push motion to remove residue,

debris and dust that can negatively

impact network performance. These

cleaners are great complements to

the existing Fluke Networks fiber

optic solvent pen, cleaning cube and

cleaning kits for all fiber

environments.

The Quick Cleaner family is

specifically designed to provide a

cost effective solution for most

bulkhead connectors and end-faces,

including MPO/MTP connectors.

1 of 4

Summary of content (4 pages)

PAGE 1
Datasheet: Quick Clean™ Cleaner Solution Datasheet: Quick Clean™ Cleaner Solution Research has shown over 85% of fiber related problems in data centers, campus, and other enterprise or telecom environments are caused by contaminated connectors or end-faces. With Fluke Networks Quick Clean™ Cleaners, harmful contaminants are easily removed from a wide variety of connector types.
PAGE 2
Quick Clean MPO Cleaner The MPO Cleaner is designed for cleaning the fiber arrays on MPO/MTP® based connectors. This tool is capable of cleaning MT based connector systems loaded in a bulkhead adapter and on unmated cable assemblies. The Quick Clean MPO Cleaners will clean both female (no guide pin) and male (with steel guide pin) patch panel. The tool will also clean both flat polished multimode and 8° angled singlemode MT ferrules.
PAGE 3
QuickClean-MPO-5P QuickClean-MPO-1P NFC-KIT-CASE NFC-KIT-BOX Quick Clean Cleaner MPO Fiber, 5 pack Quick Clean Cleaner MPO Fiber, Single Enhanced Fiber Optic Cleaning Kit – Includes an Quick Clean 1.25mm cleaner, an Quick Clean 2.5mm cleaner, an Quick Clean MPO cleaner, a solvent pen, a cleaning cube and a softcase. Fiber Optic Cleaning Kit – Includes cleaning cube with wipes, five cards with sealed cleaning zones, solvent pen and 2.5 mm port cleaning swabs. Connector Type QuickClean-1.
PAGE 4
Related Products FI-500 FiberInspector™ Micro FI-7000 FiberInspector™ Pro Fiber endface inspection for all types of installed fiber. Provides autofocus for a crisp image of microscopic debris and end-face damage. PortBright™ feature provides illumination in dark places. The FI-7000 FiberInspector Pro allows you to inspect and certify end-faces in 2 seconds so you can get the job done right the first time.