Information
MicroScanner
2
Cable Verier
• Displays cable
length, wiremap,
cable ID, and
distance to fault
• Detects Ethernet,
POTS and PoE
• Locates virtually any cable
or wire pair with IntelliTone
™
digital and analog toning
• Tests RJ11, RJ45, coax, with no
adapters
• “Oversized” backlit LCD makes
results crystal clear in any
work environment
MultiFiber
™
Pro
MPO Tester
• Automatic
scanning and
testing of all
bers in MPO
connectors
• MM and SM
versions
available
• No more fan-out cords when
testing MPO ber trunks
• Easily interpret test results
on 8 or 12 bers with minimal
navigation
• Automatically measures and
reports polarity
CERTIFICATION, TROUBLESHOOTING and INSTALLATION tools
for professionals who install and maintain critical network cabling infrastructure.
PRODUCTS OVERVIEW
Fiber Fault Location, Power Meters, and Light Sources
www.flukenetworks.com/FiberInspectionTools
Fiber QuickMap
™
/
OneShot
™
PRO
• Quickly and
efciently locate
connections and
breaks
• QuickMap tests
MM ber to 1,500
meters (4,921 ft)
• OneShot PRO tests SM ber to
23 km (15 mi)
• Simple set-up
• Six-second test time—
eliminates lengthy blind
troubleshooting
• Large display shows loss in dB
and distance in meters or feet
VisiFault
™
Visual Fault Locator
• Locates tight bends,
breaks and bad
connectors
• Veries polarity and
identies bers
• Bright red visible
laser light with
continuous and
ashing modes
• Ergonomic case
survives drops, impacts
and vibration
SimpliFiber
®
Pro Power
Meter / Light Source
• Multiple kit
congurations
with light sources
for single mode,
multimode and
PON ber optics
• Single-port, simul-
taneous dual-wavelength
feature completes testing in
half the time and saves
measurements from both
wavelengths into one record
• Min/Max capability automates
tracking of intermittent
power uctuations
TS
®
100 Cable Fault Finder
• Measure
cable
length on
spools
• Numeric
distance display
• Identify pairs with SmartTone
™
generation technology
• Identify and locate distance
to opens and shorts
• Works on any two or more
conductor cable up to
3,000 feet (915 meters)
Featured Copper Cable Test Solutions
www.flukenetworks.com/CopperTestingTools
CableIQ
™
Qualication
Tester
• Works on live
networks to provide
Ethernet switch
detection and link
conguration
• Measure cabling
performance
(10/100/1000 Mbps)
• Diagnose opens, shorts,
split pairs, insertion loss,
crosstalk, noise issues
• Graphically maps wiring
conguration and shows
distance to faults
• Tests twisted-pair, coax,
and audio
• Locate and trace cables with
IntelliTone 200 Digital Probe
(included with CIQ-KIT)
MicroMapper
™
• Simple verication
of wiremaps and
identication of
faults with LEDs
• Tests twisted pair
cables for open
circuits, shorts,
crossed pairs,
reversed pairs and
split pairs
• Remote identier enables
one-person testing
• Built-in tone generator for
tracing installed cables
hidden in walls, oors and
ceilings. Works with
Pro3000
™
Tone and Probe
(sold separately)