Information
MultiFiber
™
Pro
MPO Loss Tester
• Automatic
scanning and
testing of all
bers in MPO
connectors
• MM and SM
versions
available
• No more fan-out cords when
testing MPO ber trunks
• Easily interpret test results
on 8 or 12 bers with minimal
navigation
• Automatically measures and
reports polarity
CERTIFICATION, TROUBLESHOOTING and INSTALLATION tools
for professionals who install and maintain critical network cabling infrastructure.
PRODUCTS OVERVIEW
Fiber Fault Location, Power Meters, and Light Sources
www.flukenetworks.com/FiberInspectionTools
Fiber QuickMap
™
/
OneShot
™
PRO
• Quickly and
efciently locate
connections and
breaks
• QuickMap tests
MM ber to 1,500
meters (4,921 ft)
• OneShot PRO tests SM ber to
23 km (15 mi)
• Simple set-up
• Six-second test time—
eliminates lengthy blind
troubleshooting
• Large display shows loss in dB
and distance in meters or feet
VisiFault
™
Visual Fault Locator
• Locates tight bends,
breaks and bad
connectors
• Veries polarity and
identies bers
• Bright red visible
laser light with
continuous and
ashing modes
• Ergonomic case
survives drops, impacts
and vibration
SimpliFiber
®
Pro Power
Meter / Light Source
• Multiple kit
congurations
with light sources
for single mode,
multimode and
PON ber optics
• Single-port, simul-
taneous dual-wavelength
feature completes testing in
half the time and saves
measurements from both
wavelengths into one record
• Min/Max capability automates
tracking of intermittent
power uctuations
TS
®
100 Cable Fault Finder
• Measure
cable
length on
spools
• Numeric
distance display
• Identify pairs with SmartTone
™
generation technology
• Identify and locate distance
to opens and shorts
• Works on any two or more
conductor cable up to
3,000 feet (915 meters)
Featured Copper Cable Test Solutions
www.flukenetworks.com/CopperTestingTools
CableIQ
™
Qualication
Tester
• Works on live
networks to provide
Ethernet switch
detection and link
conguration
• Measure cabling
performance
(10/100/1000 Mbps)
• Diagnose opens, shorts,
split pairs, insertion loss,
crosstalk, noise issues
• Graphically maps wiring
conguration and shows
distance to faults
• Tests twisted-pair, coax,
and audio
• Locate and trace cables with
IntelliTone 200 Digital Probe
(included with CIQ-KIT)
MicroMapper
™
• Simple verication
of wiremaps and
identication of
faults with LEDs
• Tests twisted pair
cables for open
circuits, shorts,
crossed pairs,
reversed pairs and
split pairs
• Remote identier enables
one-person testing
• Built-in tone generator for
tracing installed cables
hidden in walls, oors and
ceilings. Works with
Pro3000
™
Tone and Probe
(sold separately)
c
r
m
FI-7000
FiberInspector
™
Pro
• Automated Pass/Fail
certication of ber optic
connector end-faces
• Graphical indication of
problem areas
• Compliant with IEC 61300-3-35
• Fully documents results using
LinkWare
™
PC or LinkWare
™
Live
LinkWare
™
Live
Certication Management
• Upload and consolidate test
results from remote sites
• Track project status from smart
devices
• Create and manage test setups
and cable ID’s
• Track last location used and
calibration status of your
entire eet
LinkWare
™
PC
Cable Test Management
Software
• Electronically save, maintain
and archive test results
• Generate professional,
customizable reports
• Provides a statistical view of
your entire cable plant’s
performance
• Compliant with TIA 606-B
DSX CableAnalyzer
™
Series
Copper Certication
• Unmatched speed for Cat 5-8
• Graphically displays the source
of failures including crosstalk,
return loss and shield faults
• Meets TIA 2G and IEC Level V—
the most stringent accuracy
requirements
• Endorsed by cabling vendors
worldwide
CertiFiber
®
Pro
Optical Loss Test Set
• Fastest time to certify—two
bers at two wavelengths
in six seconds
• Encircled Flux compliant
• Single module performs both
SM and MM testing
• SM testing to 130 km
• Built-in Visual Fault Locator
• SYSTIMAX Fiber Performance
Calculator
OptiFiber
®
Pro Series
OTDRs
• Supports LAN, datacenters,
PON, FTTx and outside plant
applications
• Automated setup of measure-
ment parameters
• Manual Expert mode allows
easy adjustments to automat-
ed settings for detailed testing
• EventMap
™
automatically
identies events including
connectors, splices, bends,
and splitters
• Gesture-based interface allows
fast, in-depth trace analysis
Manage
Report
Certify
V
ERSIV
Fluke Networks P.O. Box 777, Everett, WA USA 98206-0777
Fluke Networks operates in more than 50 countries worldwide. To find your local office contact details,
go to www.flukenetworks.com/contact or call: 1-800-283-5853
©2019 Fluke Corporation. Printed in U.S.A. 2/2019 7001151G
The System for Certifying, Managing and
Reporting on your Cabling Installation Projects
www.flukenetworks.com/Versiv
FI-3000 FiberInspector
™
Pro MPO Inspection Camera
• Total MPO endface visibility with Live View from full trunk to
individual endface
• Integrates with Versiv* / LinkWare for operation
and documentation or with mobile phones for
testing and sharing
• Automated pass/fail results
• Multiple Autofocus/Autocentering Camera
design for real time imaging
• Rugged, ergonomic design with
convenient holster
• Supports one or two rows of 8,12, or 16 UPC or APC
connectors as well as single bers*
*Versiv and single ber support available second half 2019
MicroScanner
™
Series
• Displays cable
length, wiremap,
cable ID, and
distance to fault
• Detects the PoE
class (0-8) from
802.3 at, af, and
bt switches, and
available voltage
• Locates virtually any cable or
wire pair with IntelliTone
™
digital and analog toning
• Tests RJ11, RJ45, coax, with
no adapters
• “Oversized” backlit LCD
• Displays network switch
speeds up to 10G, as well
as POTS