SOLUTIONS CATALOG Certification, troubleshooting, and installation tools for professionals who install and maintain critical network cable infrastructure
Table of Contents Tools and Test Kits Cable Certification System and Management JackRapid™ Termination Tool 31 Impact Tools 32 Blades 33 Versiv™ Cable Certification System 3 Copper Cable Test Solutions Cable Certification System and Management Datacom Cabling Copper Cable Test Solutions Product Comparison 4 Pro-Tool™ Kits 34 DSX-5000 CableAnalyzer™ 5 Electrical Contractor Telecom Kits 34 Copper Adapter and Accessories 6 Modular Crimper 35 CableIQ™ Qualification Tester 9 Cable Spl
DSX-5000 CableAnalyzer™ DSX-5000 CableAnalyzer Supports structured cabling warranties Meets TIA/ISO certification standards requirements CableIQ Qualification Tester ™ ™ The DSX-5000 CableAnalyzer improves the efficiency of copper certification with unmatched speed for testing Cat 6A and Class FA while meeting IEC Level V—the most stringent accuracy requirement. The ProjX Management System ensures jobs are done correctly the first time and helps track progress from set-up to systems acceptance.
DSX-PLA004S VERSIV-TSET VERSIV-BATTERY DSX-PLA011S VERSIV-ACUN DSX-CHA004S DSX-CHA011S DTX-PC5ES 6 VERSIV-STRP Model Description Model Description DSX-PLA001 DSX Universal Permanent Link Adapter DTX-PC6S DTX Patch Cord Test Adapter Set for Category 6 patch cords.
Copper Cable Test Solutions Description CableIQ™ Qualification Tester NFK1-DPLX-FC Duplex MM 62.
Copper Cable Test Solutions IntelliTone™ Pro 200 LAN Toner and Probe Simple verification tester verifies wiremap and identifies faults with LEDs. The IntelliTone Pro 200 LAN Toner and Probe Series from Fluke Networks is the first network cable toner and probe to offer digital and analog signaling all in one tool. The IntelliTone Pro 200 LAN Toner and Probe Series from Fluke Networks gives you superior vision for locating cables hidden in floors, ceilings, walls, and in bundles.
TS 100 PRO Cable Fault Finder ® ® Invest in the right tool for all your technicians. The new TS100 PRO Cable Fault Finder with PowerBT™ Bridge Tap Detect is a telecom technician’s first line of defense against bridge taps on a subscriber’s line. Because a bridge tap is a significant source of DSL network performance problems due to unwanted signal reflectance, it needs to be identified and fixed quickly before the problem causes customer attrition.
TS 90/TS 100 Cable Fault Finder Copper Cable Test Solutions ® ® Fluke Networks’ cable fault finders are easy-to-use, three-in-one testers: a fault locator, a cable inventory manager and a toner with SmartTone® technology. Easily find the distance to opens or shorts on electrical wire, telephone wire, security wire and coax. Displays distance reading rather than waveform.
Fiber Product Comparison FIBER TESTING, TROUBLESHOOTING AND CERTIFICATION FI-7000 FiberInspector Pro Fiber end-face certification 3 Check for fiber end-face contamination or damage 3 ™ FiberInspector Mini Video Microscope SimpliFiber Pro Optical Power Meter and Fiber Test Kits ® ™ Fiber Optic Cleaning Kits 3 Clean contamination Loss Length (Tier 1) Certification OTDR (Tier 2) Certification Plant Characteristics and Troubleshooting MultiFiber Pro MPO Power Meter and Fiber Test Kits ™ CertiF
OptiFiber Pro OTDR Launch Fibers OptiFiber Pro OTDR is the industry’s first data center OTDR built from the ground up to meet the challenges of enterprise fiber infrastructures. This fiber troubleshooting and certification tool combines uncomplicated power with unparalleled efficiency and the exact functions needed for troubleshooting or certifying campus, data center and storage fiber networks.
CertiFiber Pro CertiFiber Pro OLTS improves the efficiency of fiber certification with a 3-second, two-fibers-at-both- wavelengths test. The Taptive user interface simplifies set-up, eliminates errors and speeds troubleshooting. A set reference wizard ensures correct reference setting and eliminates negative loss errors. Built on the future-ready Versiv platform, CertiFiber Pro provides merged Tier 1 (Basic) / Tier 2 (Extended) testing and reporting when paired with OptiFiber Pro module.
FI-7000 FiberInspector Pro MultiFiber Pro End-face contamination is a leading cause of fiber failures. Dirt and contaminants cause insertion loss and back-reflection that inhibits optical transmission and causes havoc with transceivers. Fiber loss and OTDR testing can expose this problem, but in many cases, dirty connections make fiber testing time consuming and inaccurate. MultiFiber Pro is the first MPO fiber tester to support both Singlemode and Multimode MPO fiber certification.
SimpliFiber Pro Optical Power Meter SimpliFiber Pro Optical Power Meter and Fiber Test Kits are the single “go-to” kits for anyone involved in first-line optical fiber cabling installation and verification. Designed for in-house fiber technicians as well as contractors, our expertly configured kits are housed in a professional and durable case and contain all the simple-to-use tools needed to quickly measure loss and power levels, locate faults and polarity issues, and inspect and clean connector end-faces.
Fiber QuickMap - Multimode Fiber Length and Distance to Fault ™ 26 Fiber QuickMap quickly and efficiently locates connections and breaks in multimode fiber with the press of one-button. By instantly (six second typical test time) providing distances to failures such as high-loss and high-reflectance incidents, it is the must-have troubleshooter for any technician who works with fiber in datacenters or campuses.
Fiber OneShot PRO - Singlemode Fiber Length and Distance to Fault Fiber OneShot PRO takes the complexity out of singlemode fiber testing by analyzing fiber links and measuring faults up to 23,000 meters (15 miles) in less than five seconds. Whether you are troubleshooting FTTx, Hybrid Fiber Coax (HFC), fiber links between Central Offices, or working on regional or rural access networks, Fiber OneShot PRO is your first response to fiber trouble.
Fiber Inspection and Cleaning JackRapid™ Termination Tool Contaminated end-faces are the #1 cause of fiber link failure. Prevent this common problem with Fluke Networks’ Fiber Optic Cleaning Kits and Components. These precision fiber optic cleaning kits and components allow effective removal of all contaminants from end-faces on both patch cords and inside ports. The JackRapid Termination Tool is the industry’s most innovative and time-saving installation tool.
Model Description EverSharp™ Blades SoftTouch D914S Impact Tool offers an ergonomic design with a soft rubber handle for better grip and rounded edges to absorb more of the impact recoil. Includes built-in probe pic/spudger and torque, allowing you to choose from high-and low-impact settings.
Test Tools and Kits Pro-Tool Kit Model IS60 IS50 All the professional tools you need to cut, strip, clean and connect network phone and data lines to blocks and jacks. Bundled together in our sleek form-fitting PVC Dur-A-Grip™ tool pouch—holds your tools securely inside, even upside down. Five tool kit combinations to choose from to meet a multitude of applications.
Model Description This line of cable strippers includes a double slotted cable stripper for 22/24 AWG wire installation and a coax stripper to perform 2-level and 3-level stripping of RG58/59 coaxial cables. We also offer a combo stripper that cuts and rings Teflon®, smoothly slits fiber, copper and coaxial cables and rings 25-100 pair cable.
TS 54 TDR Test Set TS 52 PRO LCD Test Set A three-in-one—TDR, toner and pair identifier—premium, VDV test set • Toner—five separate tones for fast and easy differentiation between multiple wire pairs The TS52 PRO Test Set features the latest in test set technology. Designed with a superior, radiant liquid crystal display (LCD) user interface, it allows you to see what cannot be heard in any outside plant environment.
TS 30 Test Set TS 25D LCD Test Set The TS30 Test Set features a rigid test set case design, at an affordable price. The ergonomic non-slip grip handle provides improved handling of the set in all weather conditions. Includes DataSafe™ operation so technicians can clip onto a line in monitor mode, without disrupting existing data traffic. • RainSafe™ protection in severe weather conditions The TS25D Test Set features data lockout and lockout override, making you completely safe in talk or monitor mode.
In-line banjo modular adapters permit testing on working lines without disrupting service. Quickly determine whether the trouble is in the phone or in the line.
GOLD SUPPORT Telephone Butt-Sets and Access Network Test Voltage Detector In just a few seconds, a technician can determine if it’s safe to work around areas such as transformer cases and circuit breaker housings, power ground wires or newly-driven ground rods, mobile homes, metallic siding or metal framing, pedestals, cross boxes or conduit, street light fixtures or electrical machinery.
Gold Membership Privileges Technical support Protect Your Investment and Minimize Business Downtime with Gold Membership Unlimited 24/7 technical expertise with local language support. Gold members are provided with direct members-only priority phone numbers to our world-class Technical Assistance Centers (TAC). Gold Membership is much more than just a repair warranty. It is a comprehensive maintenance and support program that offers expanded coverage for Fluke Networks’ products and accessories.
Contact Us Corporate Customer Service, Technical Support and Training Fluke Networks 1-800-283-5853 (Toll free inside U.S. and Canada) 1-425-446-4519 (Worldwide) Everett WA 98203, USA Customer Service Email: info@flukenetworks.com Support Email: support@flukenetworks.com Training Email: training@flukenetworks.com www.flukenetworks.com www.flukenetworks.com/facebook Fluke Networks P.O. Box 777, Everett, WA USA 98206-0777 www.flukenetworks.com/twitter www.flukenetworks.