Users Manual Owner manual

Chapter 1: Get Acquainted

Safety Information

 Do not use the tester if it is damaged. Inspect the

tester before use.

 Do not open the case; no user-serviceable parts are

inside.

 Do not modify the tester.

 If this equipment is used in a manner not specified

by the manufacturer, the protection provided by the

equipment can possibly be impaired.

Caution

To prevent damage to the tester or cables under

test and to prevent data loss:

 To prevent unreliable test results, connect the ac

adapter or replace the battery as soon as the low

battery indication appears.

 Keep modules attached to the Versiv units to give

protection to the module connectors.

 Do not remove the USB flash drive while the LED on

the drive flashes. Doing so can corrupt the data on

the drive.

 You can lose a USB flash drive, cause damage to it,

or accidentally erase the contents of the drive. Thus,

Fluke Networks recommends that you save no more

than one day of test results on a flash drive.