Users Manual Owner manual

Versiv Cabling Certification Product Family

Technical Reference Handbook

 FIX LATER: This button shows if the test failed and Auto Save is

off. Tap FIX LATER to save the results with an ID that you make

or select.

 TEST AGAIN: This button shows if the test failed. Tap this button

to do the test again for the same ID. If Auto Save is on, the tester

saves subsequent results with the same ID. If Auto Save is off,

you can save the result if necessary. When you look at a saved

result that failed, tap TEST AGAIN to do the test again for the

same ID and with the same test settings as the saved result.

Note

The color of the FIX LATER and TEST AGAIN

buttons (yellow or gray) depends on which button

you tapped the last time you did a test that failed.

 TEST (yellow): This button shows if the test passed and Auto

Save is on. When Auto Save is on, the tester saves results with

the next available ID when the test is completed. When you tap

TEST, the tester does a test for the next available ID.

 : The  key does the same function as the TEST AGAIN

and TEST buttons. To do a test when you do not see a TEST

AGAIN or TEST button, press .

Options for Cable IDs

When you save the test results for a cable, you usually give the

results the name that is the ID for the cable. There are several

methods you can use to make IDs for test results:

 You can use the CABLE ID SETUP screen to make a set of

sequential IDs. See “Tutorial: Make a Set of Sequential Cable

IDs” on page 57. When Auto Save is also

on, the tester

automatically saves each result wi

th the next available ID in

the set.

A cable ID set also lets you use IDs again so you can add

different

results to tests you saved before.