IntelliTone Pro ™ 200 LAN Toner and 200 Probe Users Manual August 2014 ©2014 Fluke Corporation All product names are trademarks of their respective companies.
LIMITED WARRANTY AND LIMITATION OF LIABILITY Each Fluke Networks product is warranted to be free from defects in material and workmanship under normal use and service. The warranty period for the mainframe is one year and begins on the date of purchase. Parts, accessories, product repairs and services are warranted for 90 days, unless otherwise stated. Ni-Cad, Ni-MH and Li-Ion batteries, cables or other peripherals are all considered parts or accessories.
Contents Title Overview of Features ................................................................................................... Registration .................................................................................................................. Contacting Fluke Networks ......................................................................................... Unpacking .....................................................................................................................
IntelliTone Pro Users Manual Validating the Cable’s Shield ....................................................................................... Validating Ethernet Service ......................................................................................... Testing for Continuity .................................................................................................. Maintenance .................................................................................................................
IntelliTone™ Pro 200 LAN Toner IntelliTone™ Pro 200 Probe Overview of Features The IntelliTone Pro 200 LAN toner and Pro 200 probe let you locate, isolate, and validate twisted pair (UTP, Cat 5e, Cat 6), coax cables (RG6, RG59, and others for CATV/CCTV), bare wire (such as speaker wire and security network wire), and Cat 3 telephone cabling. The toner also lets you validate data services. The toner and probe feature both digital and analog toning and detection.
IntelliTone Pro Users Manual Contacting Fluke Networks Unpacking For technical support, please contact us via support@flukenetworks.com. The IntelliTone products come with the accessories listed below. If an accessory is damaged or missing, contact the place of purchase immediately. www.flukenetworks.com support@flukenetworks.
Safety Information Warning IP200 IntelliTone Pro Probe IP200 Probe with 9 V battery Quick Reference Guide To prevent possible fire, electric shock, or personal injury: Never use the toner, probe, or test leads if they are damaged. Inspect the cases and test leads for damage before use. Never open the case except to change the battery; no user-serviceable parts are inside. Warning: Risk of personal injury. See explanations in the manual.
IntelliTone Pro Users Manual Battery Status LEDs on the toner and probe light for 1 second at power on to indicate the battery status: Toner battery status LED Probe battery status LED Green: Battery is good. Yellow: Battery is marginal. Red: Battery is low. See “Battery Life and Replacement” on page 16 for more information on the battery. Auto Power Down The toner turns off automatically after approximately 2 ½ hours of inactivity. The probe turns off automatically after 1 hour of inactivity.
Locating and Isolating Terminated UTP/STP Cables with the IntelliTone In locating mode, the probe’s LEDs light up from 1 to 8 as the signal strength increases. The higher the number, the stronger the signal. Note If you cannot locate the IntelliTone signal on 2conductor cables, the cable may be shorted. Use the cable map test (page 8) to test for shorts on cables with RJ11 and RJ45 connectors. Use the continuity test (page 12) to check for shorts on coax and non-terminated cables.
IntelliTone Pro Users Manual Connecting the Toner Locating Cables Isolating Cables SmartToneTM, Analog 1kHz toning Volume control Digital toning ASH04.EPS Figure 1.
Isolating Individual Wire Pairs with the SmartTone Analog Function Isolating Individual Wire Pairs with the SmartTone Analog Function The position on the IntelliTone probe and toner lets you use the probe to trace using an analog 1kHz tone. SmartTone is intended for use on dry pairs of wires that are un-terminated at both ends of the run. It is not intended to be used on live wires with a DC power source (e.g., live telephone lines), nor will it work on wire pairs that are carrying AC signals.
IntelliTone Pro Users Manual Validating RJ11 and RJ45 Cable Maps You can use the IT200 toner and IP200 probe to validate the cable map on RJ11 and RJ45 connectors. The cable map function finds the most common wiring faults on twisted pair cabling: shorts, opens, and crossed pairs. 1 Connect an IT200 toner to a RJ11 or RJ45 jack, as shown in Figure 2. 2 Turn the toner’s rotary switch to .
Validating RJ11 and RJ45 Cable Maps 4 3 2 1 4 3 2 1 MAP o EL 0 PR LIT OB ONE E Pr INT 20 4 3 2 1 .. . .. . .. . 4 3 2 1 4 3 2 1 4 3 2 1 .. . .. . .. . = Shield (If enabled. See text.) ASH05.EPS Figure 2.
IntelliTone Pro Users Manual Validating the Cable’s Shield The SYNC LED will now indicate a good, open, or shorted shield as described in the previous section. To use the probe’s SYNC LED for shield validation during cable map tests, do the following: To disable shield validation via the probe’s SYNC LED, do the following: 1 Remove the battery door and disconnect the battery from the probe, as described under “Battery Life and Replacement” on page 13.
Validating Ethernet Service Validating Ethernet Service Punch-down block The toner detects link pulses for 10BASE-T, 100BASE-TX, and 1000BASE-T Ethernet service on pins 1, 2 and 3, 6 of its RJ45 jack. 1 Turn off the toner. 2 Connect the toner to the circuit as shown in Figure 3. 3 Turn the toner’s rotary switch to SERVICE. 4 The Ethernet LED indicates service on pins 1, 2 or 3, 6 as shown in Figure 3.
IntelliTone Pro Users Manual Testing for Continuity You can use the toner to test circuits and components for continuity. 1 If you are testing a circuit, verify that it is not powered. Use the toner’s continuity function to check for continuity. Use a voltage meter to check other types of circuits for power. 2 Turn off the toner. 3 Connect the toner to the circuit or component as shown in Figure 4. .
Maintenance Maintenance Warning Clean the case with a soft cloth dampened with water or a mild soap solution. Caution To avoid damaging the case, do not use solvents or abrasive cleansers. Battery Life and Replacement The toner and probe batteries last for about 20 hours of typical use. To avoid possible electric shock or personal injury: Turn off the toner or probe and disconnect all test leads before replacing the battery.
IntelliTone Pro Users Manual Accessories To order accessories (Table 2), contact Fluke Networks. For the latest list of IntelliTone accessories and other cable testers visit the Fluke Networks website at www.flukenetworks.com. Table 2. Accessories Accessory See text regarding probe's switch position during battery replacement. ASH10.EPS Figure 5.
Specifications Specifications Specifications apply at 23 °C (73 °F), unless otherwise noted.
IntelliTone Pro Users Manual IT200 Toner Electrical Specifications Output power 5 V p-p Tone frequencies 1 digital tone 500 kHz 1 analog tone 1 kHz Battery type and life 9V alkaline (NEDA 1604A or IEC 6LR61); 20 hours typical Auto power down Turns off automatically after 4 hours of inactivity IP200 Probe Electrical Specifications Tone detection Detects the IntelliTone signal from an IT200 toner and a 1 kHz signal from other toners.
Specifications Feature Compatibility Product Compatibility IntelliTone Toner/Probe Feature IntelliTone Toner and Probe Works with Legacy Toner or Probe IntelliTone locate mode IntelliTone isolate mode Cable map validation Shield validation Analog tone 1 kHz Visual / audible proximity indicators Requires IntelliTone IP200 probe. Dimensions Weight (with battery) Toner: 5.54 in x 2.94 in x 1.25 in Toner: 6.0 oz (170 g) (14.1 cm x 7.5 cm x 3.2 cm) Probe: 4.
IntelliTone Pro Users Manual 18
