User Manual
Table Of Contents
- IntelliTone Pro Users Manual
- LIMITED WARRANTY AND LIMITATION OF LIABILITY
- Contents
- Overview of Features
- Registration
- Contacting Fluke Networks
- Unpacking
- Safety Information
- Battery Status
- Auto Power Down
- Locating and Isolating Terminated UTP/STP Cables with the IntelliTone
- Isolating Individual Wire Pairs with the SmartTone Analog Function
- Validating RJ11 and RJ45 Cable Maps
- Validating the Cable’s Shield
- Validating Ethernet Service
- Testing for Continuity
- Maintenance
- Specifications
IntelliTone Pro
Users Manual
12
Testing for Continuity
You can use the toner to test circuits and components for
continuity.
1
If you are testing a circuit, verify that it is not
powered. Use the toner’s continuity function to
check for continuity. Use a voltage meter to check
other types of circuits for power.
2
Turn off the toner.
3
Connect the toner to the circuit or component as
shown in Figure 4.
4
Turn the toner’s rotary switch to .
5
The LED indicates an open or closed circuit as
shown in Figure 4.
ASH09.EPS
Figure 4. Continuity Test
>10k
=
=