User Manual
Table Of Contents
- IntelliTone Pro Users Manual
- LIMITED WARRANTY AND LIMITATION OF LIABILITY
- Contents
- Overview of Features
- Registration
- Contacting Fluke Networks
- Unpacking
- Safety Information
- Battery Status
- Auto Power Down
- Locating and Isolating Terminated UTP/STP Cables with the IntelliTone
- Isolating Individual Wire Pairs with the SmartTone Analog Function
- Validating RJ11 and RJ45 Cable Maps
- Validating the Cable’s Shield
- Validating Ethernet Service
- Testing for Continuity
- Maintenance
- Specifications
IntelliTone Pro
Users Manual
16
IT200 Toner Electrical Specifications
IP200 Probe Electrical Specifications
Output power 5 V p-p
Tone frequencies 1 digital tone 500 kHz
1 analog tone 1 kHz
Battery type and life 9V alkaline (NEDA 1604A or IEC 6LR61); 20 hours typical
Auto power down Turns off automatically after 4 hours of inactivity
Tone detection Detects the IntelliTone
signal from an IT200 toner and a 1 kHz signal from other toners.
Battery type and life 9V alkaline (NEDA 1604A or IEC 6LR61); 20 hours typical
Auto power down Turns off automatically after 1 hour of inactivity