User Manual

Safety Information
3
IP200 IntelliTone Pro Probe
 IP200 Probe with 9 V battery
 Quick Reference Guide
Safety Information
Table 1 describes the international electrical symbols used
on the tester and in this manual.
Table 1. International Electrical Symbols
Warning: Risk of personal injury. See explanations
in the manual.
Caution: Risk of damage or destruction to
equipment or
software. See explanations in the
manual.
Warning: Risk of electric shock.
This equipment not for connection to public
communications n
etworks, such as active
telephone systems.
Do not put circuit boards in the garbage. Dispose
of
circuit boards in accordance with local
regulations.
Conformité
Européenne
Meets RCM standard
 Warning 
To prevent possible fire, electric shock, or
personal injury:
 Never use the toner, probe, or test leads if they
are damaged. Inspect the cases and test leads for
damage before use.
 Never open the case except to change the battery;
no user-serviceable parts are inside.
 Turn off the toner or probe and disconnect all test
leads before replacing the battery.
 Use only a 9V battery, properly installed in the
case, to power the toner and probe.
 If this equipment is used in a manner not specified
by the manufacturer, the protection provided by
the equipment may be impaired.
 Caution
 Avoid touching the probe tip to patch panel
connections and using the tip to dig into cable
bundles. Doing so regularly may damage the
probe tip over time.
 To avoid unreliable test results, replace the
battery as soon as the low battery indication
appears.





