User manual

ManualsBrandsFLUKE NETWORKS ManualsTest EquipmentCable tester

Enhanced Fiber Optic Cleaning Kit

NFC-Kit-Case-E

The complete solution for precision end-face fiber optic cable cleaning. NFC-Kit-Case-E includes:

Quick Clean 1.25mm cleaner, Quick Clean 2.5mm cleaner, an Quick Clean MPO cleaner, a solvent

pen, a cleaning cube and a softcase

 Contains everything needed to eliminate the #1 cause of fiber optic link failure: contamination

 Supports all fiber connector types in datacenter and campus environments

 Quick Clean™ Cleaners—no training required!

 Solvent pen precisely dispenses specially formulated fiber optic cleaning solution

 Cards for convenient cleaning of fiber end-faces

 Rugged carrying case stores and transports all fiber optic cleaning tools

Overview

Dirt, dust and other contaminants are the enemies of high-speed data transmission over optical fiber. Today's

network applications require more bandwidth than ever, making loss budgets tighter than ever. Hence, it is critical

that all optical connections are free of contaminants to avoid having application performance issue.

Fluke Networks’ Fiber Optic Cleaning Kits contains the best fiber optic cleaning tools to effectively remove the

toughest contaminants in any fiber network. You can choose between the easy-to-use Quick Clean Cleaners, the

convenient cleaning cube/card and the best optic solvent pen to clean both patch cords and fiber end faces inside

ports. All fiber optic cleaning materials are lint-free and enable an optimal wet and dry cleaning process.

Summary of content (6 pages)

PAGE 1
Enhanced Fiber Optic Cleaning Kit NFC-Kit-Case-E The complete solution for precision end-face fiber optic cable cleaning. NFC-Kit-Case-E includes: Quick Clean 1.25mm cleaner, Quick Clean 2.
PAGE 2
Features Cleaning Instructions Clean End Faces with the Quick Clean 1.25mm or 2.5mm Cleaner: 1. Open or remove the guide cap from the Quick Clean Cleaner. 2. Push the cleaner straight into the connector and you will a hear a click to confirm cleaning. Clean End Faces with the Quick Clean MPO Cleaner: 1. Open or remove the guide cap from the Quick Clean Cleaner. 2. Push the cleaner straight into the connector. 3. Turn the dial until you hear a click to confirm cleaning. Inspect every end-face first.
PAGE 3
Cleaning patch cords with a Cleaning Card: 1. 2. 3. 4. Remove the plastic cover from one cleaning zone. Apply a minimal spot of solvent to the starting corner of the cleaning zone. Holding the connector perpendicularly, swipe the end-face from the wet spot into a dry zone. Inspect again to ensure a complete cleaning. If necessary, expose a new cleaning zone and repeat steps again Cleaning patch cords with a Cleaning Cube: 1. 2. 3. 4. Pull a clean wipe from the Cleaning Cube.
PAGE 4
* Note that applying solvent directly from the pen to a swab will result in excess solvent on the swab. What To Avoid When Cleaning End-Faces There are as many different cleaning techniques as there are fiber optic network technicians. While some techniques work some of the time, reliable and lasting performance of your fiber links require inspection and proper cleaning processes with every mating.
PAGE 5
Specialized Solvent For years isopropyl alcohol (IPA) was used to clean fiber end-faces, but now there are customized solvents that are far superior, such as Fluke Networks’ Fiber Optic Solvent Pen. Most importantly, this specialized solvent is more effective than IPA at dissolving all contaminants, especially non-ionic compounds such as buffer gel and pulling lube. You will get a better clean every time and with every contaminant.
PAGE 6
Specifications Specifications Quick Clean 1.25mm Contents: Each unit cleans a minimum of 500 end faces Dimensions: 0.69” x 0.69” x 7.05” Quick Clean 2.5mm Material: Proprietary lint-free cleaning strand Contents: Each unit cleans a minimum of 500 end faces Dimensions: 0.69” x 0.69” x 7.05” Quick Clean MPO Material: Proprietary lint-free cleaning strand Contents: Each unit cleans a minimum of 600 end faces Dimensions: 0.87” x 2.22”x 7.