User manual

Features
Cleaning Instructions
Clean End Faces with the Quick Clean 1.25mm or 2.5mm Cleaner:
1. Open or remove the guide cap from the Quick Clean Cleaner.
2. Push the cleaner straight into the connector and you will a hear a click to confirm cleaning.
Clean End Faces with the Quick Clean MPO Cleaner:
1. Open or remove the guide cap from the Quick Clean Cleaner.
2. Push the cleaner straight into the connector.
3. Turn the dial until you hear a click to confirm cleaning.
Inspect every end-face first. If it is clean, then it can be inserted as is. Most likely, it has accumulated some form of
contamination and needs to be cleaned right before insertion: